:	May 21, 2004

.

Disconnect the battery ground cable.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the engine undershield.

.

: Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug any open connections to prevent contamination. Remove the CKP sensor.   Disconnect the electrical connector.   Remove the Torx screw.

.

To install, reverse the removal procedure.   Tighten the Torx screw to 8 Nm (6 lb.ft).